Tampa Bay Appliance Fix logo Tampa Bay Appliance FixMon to Fri, 8 AM to 4 PM Call(813) 822-5910

Washer repair ยท Seffner, FL

Washer Repair in Seffner, FL

$99service call, credited to the repair
90 daysparts and labor warranty
8 to 4Monday to Friday
$125commercial service call
Repair request

Book a technician

This field is for validation purposes and should be left unchanged.
Name(Required)
This field is hidden when viewing the form
This field is hidden when viewing the form
This field is hidden when viewing the form
What Type of Appliance(s) Do You Need Repaired?(Required)

$99 service call, credited to the repair. $125 for commercial units. Or call (813) 822-5910, Mon to Fri, 8 AM to 4 PM.

Washer repair in Seffner

Washer that powers on and then does nothing, or will not drain and spin on its own in Seffner? We test the whole machine at your home, name a price before any work, and cover the repair for 90 days on parts and labor. Call (813) 822-5910.

Seffner homes off Mango Road and along Martin Luther King Jr. Boulevard often keep the washer in the garage or a laundry room off the carport. That matters for one very common call: a washer that seems dead or half alive, when the real problem is the power reaching it.

Two washer calls from next door

We do not have a Seffner washer job to show from this year yet, so here are two from the neighboring towns, each a typical way a washer stops working.

  • August 2026, Valrico: the washer came on but did not do anything. Lights with no action point to the lid or door lock, the lid switch, a water supply problem, or the control.
  • August 2026, Riverview: the washer would not drain or spin unless the owner helped it along by hand. A machine that only finishes with help usually has a weak drain pump, a partial clog, or a lid lock that does not confirm it is closed.

Dead or half working? Check the outlet first

Garage and laundry room outlets are often on a GFCI, the outlet with Test and Reset buttons. A GFCI can trip during a storm or when water splashes nearby, and it may be on a different outlet than the one the washer plugs into.

  1. Look for a GFCI outlet in the garage, laundry room or a nearby bathroom, and press Reset.
  2. Check the breaker panel for a tripped breaker.
  3. Unplug the washer for one minute and plug it back in. This resets many electronic controls.
  4. Make sure the lid or door closes firmly. Most washers will not start, drain or spin without a confirmed lock.

If it still will not run a full cycle, the lid lock, drain pump, motor control or main board needs testing.

Starting prices

RepairTotal
Washer will not drain, drain pumpfrom $250
Washer door or lid lockfrom $140

Starting totals, including the $99 service call. The final price depends on the model and part and is quoted after diagnosis, before any work starts.

Seffner visits

Seffner diagnostic visits are $99, and that fee is removed from the total once you approve the repair. See appliance repair in Seffner for refrigerators, dryers and ranges. Washer service nearby: Brandon and Plant City.

Seffner washer questions

My washer lights up but will not start. Is it broken?
Not always. A lid that is not fully latched, a closed water faucet or a control that needs a reset can all look like a dead washer. If the simple checks do not help, the lock or control needs testing.
Can a GFCI outlet stop my washer?
Yes. If the GFCI protecting that circuit trips, the washer gets no power or loses it mid cycle.
Which washers do you repair?
Top load and front load from Whirlpool, Maytag, GE, Samsung, LG, Speed Queen and other brands.

Recent job reports

All job reports
Drain pump and hose under an LG top load washer
SarasotaOct 2026

LG top load washer showing an OE drain error in Sarasota

Unit
LG washer, WT1001CW
Symptom
Washer stopped with an OE error and would not drain
Found
The washer drained normally during the visit and the drain pump ran. The fault looked intermittent, a pump that fails under load
Outcome
Recommended a new drain pump as a preventive repair. The customer chose to wait and call back if the OE code returns
Burnt and scaled water inlet valve and dispenser assembly from a Maytag washer
Tampa, 33609Jun 2026

Maytag top load washer filling while turned off in Tampa

Unit
Maytag washer
Symptom
Water dripping into the washer drum even when the washer was off
Found
The hot and cold water inlet valves were leaking internally and not closing
Outcome
Replaced the water inlet valve and dispenser assembly

What customers wrote on Google

Read all reviews
  • ★★★★★Jun 2026

    Great repair man! His service was top notch. I welcome him back anytime to repair any appliance. Need more service repair personnel like him.

    Jerry G., Google review
  • ★★★★★Jun 2026

    Sam has been wonderful scheduling us last minute for a GE profile refrigerator repair on CHRISTMAS EVE, returning when we had questions a month later (frig was working fine), and came within 48hours of a call to replace our garbage disposal. Communication has been exceptional and promptness the best! Tim, his associate, was excellent today. We have been so pleased...

    Monica S., Google review
  • ★★★★★Jun 2026

    Sam fixed my ice maker. Highly recommend.

    Mike V., Google review
  • ★★★★★Jun 2026

    Our washing machine was making a strange noise and so I called Tampa Bay Appliance Fix to check it out. I got Sam on the phone, he was very professional, nice, and asked questions to diagnose the issue over the phone. We agreed that it's best for someone to check it out. A technician named Tim showed at my door...

    Ivan D., Google review
  • ★★★★★Jun 2026

    Super happy with this company. Appliances break, so over the years Sam fixed our fridges (Samsung and GE), our washing machine (LG), our microwave ( Wolf) . He is fair priced and very reliable and knows everything there is to know about his job.

    Vlad B., Google review
  • ★★★★★Jun 2026

    I would give more stars if I could, I highly recommend Tampa Bay Appliance Fix. We were having issues with our ice machine and I found this company through a Google search and I am so glad I did. Sam was able to get someone out that same say. Communication was great from start to finish with updates. Our machine...

    Posey F., Google review