Tampa Bay Appliance Fix logo Tampa Bay Appliance FixMon to Fri, 8 AM to 4 PM Call(813) 822-5910

Washer repair ยท Riverview, FL

Washer Repair in Riverview, FL

$99service call, credited to the repair
90 daysparts and labor warranty
8 to 4Monday to Friday
$125commercial service call
Repair request

Book a technician

This field is for validation purposes and should be left unchanged.
Name(Required)
This field is hidden when viewing the form
This field is hidden when viewing the form
This field is hidden when viewing the form
What Type of Appliance(s) Do You Need Repaired?(Required)

$99 service call, credited to the repair. $125 for commercial units. Or call (813) 822-5910, Mon to Fri, 8 AM to 4 PM.

Washer repair in Riverview

Washer grinding, stuck mid cycle, showing an error code or not draining in Riverview? We repair top load and front load washers at your home, quote one total before starting, and back the repair for 90 days on parts and labor. Call (813) 822-5910.

Washer calls come in steadily from Riverview, from Ballentrae and the neighborhoods off Symmes Road to the older streets near the river. Busy households run a lot of loads, and the parts that wear first are the ones that move: pumps, gearcases, bearings and lid locks.

Riverview washer calls in 2026

MonthWasherComplaintWhat we found
MayMaytag front loadShowing an error codeError codes point to a system, not a part. The technician reads the code, then tests that circuit.
JuneTop loadStuck on the wash cycle and noisy, but still drainingDiagnosed at the home.
AugustTop loadNot draining, lid lock problem, error F9E1The drain pump had failed and the actuator was defective. On this model the actuator is built into the motor assembly, so the repair meant a motor assembly, bearings and a drain pump. With that many major parts, the total was high, and the owner got the full number to weigh against a new washer.
OctoberWhirlpool top loadLoud grinding during spin, near the bottomA defective gearcase. It was replaced.

When the repair costs too much

Sometimes one symptom hides several worn parts, as on the August job. When that happens we do not trim the quote to make it look smaller. You get the real total and an honest opinion: repair it if the washer is otherwise solid and fairly new, replace it if it is older and the repair is close to the price of a new machine.

Grinding on a top loader

Grinding that starts with the spin and comes from low in the cabinet usually means the gearcase or the drive coupling. Stop using the washer. Running it can strip the remaining gears or damage the motor, which turns one repair into two.

Starting prices

RepairTotal
Washer will not drain, drain pumpfrom $250
Washer door or lid lockfrom $140

Starting totals, including the $99 service call. The final price depends on the model and part and is quoted after diagnosis, before any work starts.

Riverview visits

A Riverview visit costs $99 for the diagnosis, and the fee is applied to the repair when you go ahead. Other appliances are on appliance repair in Riverview. Washer service nearby: Brandon and Apollo Beach.

Riverview washer questions

What does an error code on my washer mean?
It tells the technician which system reported a fault, like draining or locking. The cause still has to be tested, because several parts can trigger the same code.
Can a gearcase be replaced?
Yes, on most top load washers. It is a bigger repair than a pump, so we quote it before any work.
Do you work with property managers in Riverview?
Yes, with written reports for each job.

Recent job reports

All job reports
Drain pump and hose under an LG top load washer
SarasotaOct 2026

LG top load washer showing an OE drain error in Sarasota

Unit
LG washer, WT1001CW
Symptom
Washer stopped with an OE error and would not drain
Found
The washer drained normally during the visit and the drain pump ran. The fault looked intermittent, a pump that fails under load
Outcome
Recommended a new drain pump as a preventive repair. The customer chose to wait and call back if the OE code returns
Burnt and scaled water inlet valve and dispenser assembly from a Maytag washer
Tampa, 33609Jun 2026

Maytag top load washer filling while turned off in Tampa

Unit
Maytag washer
Symptom
Water dripping into the washer drum even when the washer was off
Found
The hot and cold water inlet valves were leaking internally and not closing
Outcome
Replaced the water inlet valve and dispenser assembly

What customers wrote on Google

Read all reviews
  • ★★★★★Jun 2026

    Great repair man! His service was top notch. I welcome him back anytime to repair any appliance. Need more service repair personnel like him.

    Jerry G., Google review
  • ★★★★★Jun 2026

    Sam has been wonderful scheduling us last minute for a GE profile refrigerator repair on CHRISTMAS EVE, returning when we had questions a month later (frig was working fine), and came within 48hours of a call to replace our garbage disposal. Communication has been exceptional and promptness the best! Tim, his associate, was excellent today. We have been so pleased...

    Monica S., Google review
  • ★★★★★Jun 2026

    Sam fixed my ice maker. Highly recommend.

    Mike V., Google review
  • ★★★★★Jun 2026

    Our washing machine was making a strange noise and so I called Tampa Bay Appliance Fix to check it out. I got Sam on the phone, he was very professional, nice, and asked questions to diagnose the issue over the phone. We agreed that it's best for someone to check it out. A technician named Tim showed at my door...

    Ivan D., Google review
  • ★★★★★Jun 2026

    Super happy with this company. Appliances break, so over the years Sam fixed our fridges (Samsung and GE), our washing machine (LG), our microwave ( Wolf) . He is fair priced and very reliable and knows everything there is to know about his job.

    Vlad B., Google review
  • ★★★★★Jun 2026

    I would give more stars if I could, I highly recommend Tampa Bay Appliance Fix. We were having issues with our ice machine and I found this company through a Google search and I am so glad I did. Sam was able to get someone out that same say. Communication was great from start to finish with updates. Our machine...

    Posey F., Google review